System key features:
- Baseplate mounting
- Dry diaphragm evacuation pump
- Gas charge manifold
Chamber key features:
- Operates up to 60 psi
- Rear connection port
- 0-30 inHg to 100 psi compound gauge
Gas charge manifold key features:
- Charge Manifold includes Helium fill, Vent and Evac valves to properly perform helium charge process.
- Includes the following:
- 0-150 pisg Pressure gauge (with manual setpoint adjust)
- 75 psig Pressure relief valve
- 3’ section of 3/8" tubing to connect to test object or chamber
- Assembly fully leak tested and functionally tested.
Chamber Specifications
|
Material
|
304 stainless steel
|
Dimensions
|
3" DIA x 6" L, horizontal chamber
|
Chamber weight
|
15 lbs
|
| Lid |
Removable lid with 4 clamps
|
Pressure rating
|
Full vacuum and pressures up to 60 psi
|
Gauge
|
Compound pressure gauge 2.5" face, 0-30 inHG to 100 psi |
Chamber Ports
|
1/4" npt with 3/8" tube connection, located rear of chamber
|
| Gas Charge Manifold Specifications |
| Manifold Material |
Black Anodized Aluminum |
| Max Pressure |
60 psig |
| Pressure Relief Valve Rating |
75 psig |
| Helium Fill Valve |
Ball valve (1/4" npt) with 1/4" tube connection (includes 3' of tubing) |
| Vent Valve |
Ball valve (1/4" npt) with 1/4" tube connection (includes 3' of tubing) |
| Evac Valve |
Ball valve (1/4" npt) with NW16 connection |
| Evac Pump Specifications |
| Pump |
Dry diaphragm pump |
| Pump Speed |
1.8 m3/h (1.06 CFM) |
| Voltage |
24 VDC |
| Baseplate Specifications |
| Dimensions | 13” W x 22” L |
| Material | Black textured carbon steel |
| Electrical Specifications |
|---|
| 100-120 VAC Connection | Nema 5-15 |
| 208-240 VAC Connection | Pigtail with IEC C13
|
| Electrical Supply | 1.5 Amps
|
Application Notes
Application Note 01-06: Helium Leak Testing of Small Sealed Parts (Bombing)
Drawings
3” DIA x 6” L Manual Baseplate Helium Bombing System Drawing - LBS0306-LDBX-1
